community tools » Post a review and get DX points » Post a video and get 3-10 DX points » Product alerts (availability, price drops, promos, etc) » Report a lower price » Post/edit information on this page » Discuss this product (forum) » Add to your DX wish list
Pros: soft inner side so phone can't be skratched. depending on the batch, it comes with A/C mount brackets. Hard plastics which i find great for stability
Cons: sometimes flips over when attached to A/C mount. besides this, the holder works without any comments
Other Thoughts: I was in doubt whether to order this holder because I was in search for one with brackets for the A/C. Eventually ordered it and the brackets were included. This however depends on the batch DX gets.
Bottomline: great holder for the price i use it in combination with FM transmitter. Works great
Pros: This product is both cheap and practical. I had a device mount in my car which I had bought from a local electronics store, but it broke so I figured I should try this one as a replacement. My old holder cost me about 50 bucks, and the quality was no more than decent. The one from DX however, is just great. The mount for the cars air vent is a nice touch.
Cons: As far as I can see, this product is nothing less than great!
Other Thoughts: Definitely a good alternative too the more expensive known-brand device mounts on the market.
Bottomline: All in all a great value. Thanks DX
Pros: - The unit holds to the windscreen with no issues - Overall construction useful and holds most PDA's smart phones with ease
Cons: - Cannot withstand hot temperatures inside a car - I suspect the tipping point for the plastic to start to weaken is around 38 degrees celcius sustained for around 2 to 3 hrs - The base plastic which connects to the suction cap softened then warped...i.e. the weight of the holder bent down and created a U shaped plastic piece. The result was that the holder tipped and touched the dashboard which also resulted in the phone clamp to also melt and deform.
Other Thoughts: Phone holders for cars are much like holders for GPS units, these things should be meant to withstand temperatures that develop on hot days within a car. In this case i have a unit that is no longer reliable but partially still hangs onto the windscreen.
Bottomline: Relatively cheap and would still do a great job if you live in a city that does not have excessively hot days.
Pros: 1. comes in box with everything nicely packed2. is quite universal - but you may need to turn the whole device to get landscape with some devices3. comes with air vent holders4. spring loaded5. strong suction and easy to use6. very strong arm
Cons: 1. it does not open wide enough to hold some devices in landscape mode - you can fix this by just spinning the holder2. maybe a little big?
Other Thoughts: some other devices have a weak lever to engage the suction but this one is quite strong and i don't think it will break so easily
Bottomline: great buy if you want to hold different things at different times - multiple phones? different devices? feels like a very strong device
In Stock: ships in 2 to 4 days (5 to 8 during new year season)
Worldwide Free Shipping