community tools » Post a review and get DX points » Post a video and get 3-10 DX points » Product alerts (availability, price drops, promos, etc) » Report a lower price » Post/edit information on this page » Discuss this product (forum) » Add to your DX wish list
Pros: I have these on all my rc batteries and esc's,I'am using well over 30 sets all of them preform well. I just bought 20 more sets as these are becomeing hard to find!!! Get them while you can. 6 dollars for 10 sets you cant go wrong!
Cons: 40 to 50 amp max which is fine for me some are hard to get apart(use a small amount dielectric grease) You have to be quick with solder iron(30 to 40 watts iron works well) and sugjest that you tin wire and plug ends first!
Other Thoughts: I use on all my applications under 60 amps...If it wasnt for these, dont know what I would use...
Bottomline: If you need quick connectors for RC batteries then get these, I did!!!
Pros: CheapUseable for low current applikations like charging if you don't want to waste a original one.
Cons: After testing the voltage drop of several samples i have noticed it's significantly higher than original connectors.Passing 4 amps different samples of the original drops between 0.3-0.5mV (millivolts).This product different samples had a drop of 2.9 to 6.2 mV.Contact elements (propably) made of brass, not copper.
Other Thoughts: Other Pros/Cons as stated in othrer reviews apply (like plastic reqireing extra care while soldering etc).
Bottomline: Ok if you know the limits of the product and can use it for something where they wont apply.
Pros: really good plugs for rc trrucks etc with high current electronics... and extremely cheap price for a lot of these plugs... cant go wrong really... comes with shrink tube as well thats a nice bonus... good deal from deal extreme as usually thanx
Cons: noticed that when soldering the plugs was a bit wiggely inside the plastic... nothing that causes any issues atleast yet... i doubt it even will.. but if a con is required thats the only one that came in my mind...
Other Thoughts: good plugs for cheap...
Bottomline: buy them
Pros: They have a very strong connection, if they come free during use you are doing something seriously wrong. Much better than using bullet or spade connectors. Smooth flat surface give a good connection area.
Cons: Little hard to part when new.Soldering tabs really need a hole to make a secure connection to wire.Heat shrink is adequate, but I prefer adhesive lined.
Other Thoughts: Best way to solder to these is to drill a hole through the soldering tab and pass the wire through it before soldering. An alternative is after tinning your wire crush it slightly, with pliers, to give a flat area to solder to.
Bottomline: Changing all my projects from bullet to these now, they are a much better alternative.
Join our Affiliate Program - click here. © 2007~2009 DealExtreme.com. All rights reserved. R98532380
Note: Stock and Availability shown on this site is for your reference only. While we strive to provide the most accurate and timely stock and availability information, availability information may become out of date and may change between the time you added an item to cart and the time your order is received.