DealExtreme: $15.20 SSC P7 C-Bin LED Emitter with 21mm Heat Sink Base (3.6V~3.7V)

See more in Flashlights, Guns & Lasers - DIY Parts & Tools

SSC P7 C-Bin LED Emitter with 21mm Heat Sink Base (3.6V~3.7V)

Price: $15.20

SKU	12721
Qty

322
diggs

Add to Wish List

Product Updates

Price Match

Report Error

Overview

Buy 3+ and Save ($13.30 ~ $13.50)

Community Tools

Typically ships in 4 to 7 days* (7 to 10 during new year season)

Worldwide Free Shipping

- Seoul Semiconductors P7 C-Bin High Power LED Emitter

- Up to 900 lumens output (rated by SSC)

- 3.6V~3.7V voltage input

- 21mm high quality head dissipating base connection board

To enable volume discounts on this site, use coupon code: BULKRATE during checkout. You will see a discount applied at the bottom of the shopping cart. Competitive pricing is available. Contact us for details.

Quantity	3+ units	5+ units	10+ units
Rate	$13.50 shipped	$13.40 shipped	$13.30 shipped

What is Bulk Rate? BulkRate is a semi-wholesale system with items priced separately from retail. When you use bulk rates, a flat $1.70 registered air mail fee will automatically be added to your cart to ensure delivery of package. While BulkRate's intention is to offer cheaper prices when you buy in bulk, because it is priced separately it on occassions show a higher than retail price. That's why we ask you to enter BULKRATE as a coupon code to manually activate the rates. You can always opt not to use the bulk rates. If you are looking for wholesale prices please feel free to contact us.

Looking to get even more?
Try

Or Contact Us Directly

Visitors' Ratings

(35 votes, submit rating)

Reviews

Write a Review, Post Photos, or Post Videos, and get DX points!

Showing latest 4 entries. Click here to read all 10 reviews.

Displaying reviews posted by certified DX gadget owners first, followed by all other posted reviews.
Bright

Posted by tz2026 on 8/2/2009
Involvement: Expert (understands the inner workings) - Ownership: more than 1 month

Price:
Ease of Use:
Build Quality:
Usefulness:
Overall Rating:

Pros: Probably the brightest LED unit as of this writing.
Will work with a 3v - even a cr2032 coin battery (be careful with anything higher without a regulator) - small and bright.
Acrylic lens disperses almost 180 degrees so is good as a flood light (sans reflector)
 
Cons: For ultimate brightness requires heat sink (beyond the base) and current limiting.
Soldering can be difficult because of the heat sinking.
 
Other Thoughts: The integrated unit (14413) might be easier but requires a higher minimum voltage.
 
Bottomline: Very good for an isolated LED for high output.

Good Product

Posted by old4570 on 6/21/2009
Involvement: Expert (understands the inner workings) - Ownership: 1 day to 1 week

Price:
Ease of Use:
Build Quality:
Usefulness:
Overall Rating:

Pros: Got one to replace the one in my 5 mode MTE 
sku.16092 . Sure did increase the output of the flashlight . From 2.2/2.4A to 2.8/3A just from swapping out the LED .
 
Cons: Bin Please ...
No clue to as to what I got ....
 
Other Thoughts: This is a great LED and it sure did boost my MTE flashlight , Im now getting 2.8A to over 3A at the tail , which means Im just about driving this LED at max Amps with a single 18650 .
 
Bottomline: I dont have a clue to the Bin , sure would be nice to know just what the heck is going on , esp with fv [ forward voltage ] ..
I think some one else said C***I bin or lower actual fv than posted . Which might explain the good performance , ...
Would be nice to know though ....DX 
I just put in an order for a second one . 
Sure do hope its the same Bin ....
 
					

SSC P7 C-Bin LED Emitter with 21mm Heat Sink Base

Posted by Jule553648 on 5/27/2009
Involvement: Expert (understands the inner workings) - Ownership: 1 day to 1 week

Price:
Ease of Use:
Build Quality:
Usefulness:
Overall Rating:

Pros: Bright isn't an appropriate word. Its amazing!!! When comparing to other 1W, 0.35A LED, feeding SSC P7 with exactly the same current(0.35A) It’s MUCH brighter! When feeding in 50mA its brighter as  three 5mm high brightness LEDs.
 
Cons: Almost no cons at all. Maybe the price should be cheaper. And on DealExtreme there is no appropriate driver to handle this LED. (except 10 pieces of 1400mA drivers, but who needs 10 pieces?!?)
 
Other Thoughts: It needs a big heat sink.
Bright!!! But dangerous for your eyes. Should be a warning.
 
Bottomline: It makes an amazing LED torch.

Bright Bright Bright !!!

Posted by billg519 on 2/28/2009
Involvement: Expert (understands the inner workings) - Ownership: 1 week to 1 month

Price:
Ease of Use:
Build Quality:
Usefulness:
Overall Rating:

Pros: Did I say it's BRIGHT ??? Mine arrived attached to a thick, generous heatsink.
I also purchased a SKU 15969 Cree C6 flashlight DIY kit. I did some machining to this Cree host, and got this emitter, 2 x DX 1400mA flashlight regulators, and 1 x 18650 battery installed. I now have an awesome small C6 size flashlight with this SSC P7 emitter in it! It does get warm in use, but stays working.
 
Cons: No real issues with this product at all. Works great.
 
Other Thoughts: This is a high powered emitter, so it needs good heatsinking in any DIY build.
 
Bottomline: If you want lots of bright white light, buy one of these and heatsink it well.
This is a great emitter and a great DX product! Now I have an awesome flashlight.

Specifications

Dimensions: 0.83 in x 0.83 in x 0.32 in
Weight: 0.18 oz