Pros: Well obviously the flame is very hot and you can burn things with it. I melted an old cola bottles bottom off. So it melts even glass.
Sounds like a flamethrower.

Cons: I had to screw the + - button over the max to get the lighter working properly but after that. No cons whatsoever :)

Other Thoughts:

Bottomline: You have to have a really bad taste to appriciate this blinking little lighter by its outlook. Yeah it looks horrible but the same time its so cool! When coming out of the pub and lighting your cigarette you'll always get a laugh with someone. Buy plenty, some guy thought mine was so cool that he stole it : )

Pros: Good: awesome color show
sturdy built
feels good in your hand

Cons: bad:
hard to fill
I had to try a few times in order to get things thing filled
I still can't get it to fill all the way like I can on my other lighters
kind of hard to see the liquid in there, but if you look by the light of some sort you will be able to tell how much fuel is still in there

Other Thoughts: I have received this lighter and I had very little experience on how to actually fill these types of lighters. I have a few others and they have been awesome to fill, nice and easy. This one however, was not so easy. I had to fiddle with a few different types of tips in order to try to get this things filled, but after a few tries, I think I got it down.

Bottomline: good deal, I have looked online and these lighters are about the same price at other place, but no complains. I love this lighter and it's really good for lighting my cigars.
this is actually a lot better then those other single torches because it puts out the heat in such a wider area and that really makes all the difference.

Pros: Very very x infinite hot lol
Melts many things and did I mention that it's really hot? Build quality is good, 80% made out of metal.

Cons: The build isn't perfect; on some of the round edges you can see some lines (it's like peeling a cucumber, you can't get the cucumber completely round :P
Uses wayy too much fuel! Also when you get the lighter it's set on a really small flame, so you have to take the plastic blue ring at the bottom off, and then put it back on after changing the direction a bit to get a larger flame.

Other Thoughts: I like the lights, but they don't last a long time.
If only they can think of an innovative way to get the lights working by burning fuel... then batteries won't be required :P

Bottomline: Great price vs. quality ratio!
My first one leaked, but then I asked for a replacement

Pros: -The flame just scares.
-Really melt all what it's said to melt, I tested with wire and stopped once it started melting cuz was scared xD
-Easy regulation
-CHEAP

Cons: -Looks crappy
-Mine come 2x defective (look bottomline)
-It just eats gas, u'll need to charge it lots of times.
-not so usefull, it will burn half cigarrete.
-it warms up really fast, after 10-15 seconds it becomes imposible to hold it on your hand.

Other Thoughts: -If you think it's defective, look this bottomline.

Bottomline: After reciving it, I thought it was defective, but after looking at it a bit more I could repair it. It had 2 problems wich are the same problems (one or the two together) that cause most of the users here to claim it's broken.
1.-Problem: The wire wich produces the spark is not covered with a plastic, or the plastic wich covers it have a hole.
How to see: Look at the sparks, if most of them or a lot of them are not going inside, meaning they go to the body of the lighter, the wire is bad covered.
Solution: Cover it with whatever you want, tipex, glue, nail polish (best). Just take care you leave uncovered the end so the sparks can go to the right place.
2.-problem: Even after regulate the gas to the maximum the flame is not strong.
How to see: put the gas level on the maximum. Then try to light it. If that does not work press the gas buton and use another lighter to light it. If the flame does not hold then that's the problem.
Solution: Put the regulator to the maximum. Now put it out (the blue disk). Put it again but a bit turned to the left (counterclockwise), now put it again. Now what was the maximum level before it's now the minimum, so can now adjust it on higher levels. This mostly happens because when it's asambled they do not take care of the regulator position, while puting it wrong makes imposible to light it, easy solution eh? :D