Pros: -lools rawrsome... that's a good thing XD
-shiny top lid
-perfect size
-comes with all parts needed

Cons: -screw holes NOT THE SIZE OF THE SCREWS, take a screwdriver and drill in until they get wide enough
-a few tiny air bubbles on the top lid
-the rest of the case is matte

Other Thoughts: BE CAREFUL WITH THE RIBBON CABLES. That's all I have to say. The lower screen is closest to its slot, but replacing the case involves taking OUT the top screen. Its ribbon cable goes THROUGH one of the hinges and is WIDER than the tube's diameter. You WILL have to twist on it and might break it. The touchscreen nibbon cable is VERY small and easily tares outta the slot under the PCB's own weight.

Bottomline: All in all it looks exactly as desired, but if ya wananassemble it you'll have ta work hard for it. Before even trying the case on widen the screwholes until all screws work with it. Pay extreme care to the ribbon cables especially the top screen one or you'll end up breaking them like I did.