DealExtreme: $12.80 3W Cree, Regulator, Reflector 1x18650 2xCR123A Module Set

See more in Flashlights, Guns & Lasers - DIY Parts & Tools

3W Cree, Regulator, Reflector 1x18650 2xCR123A Module Set

Price: $12.80

SKU	1447
Qty

82
diggs

Add to Wish List

Product Updates

Price Match

Report Error

Overview

Buy 3+ and Save ($11.74 ~ $11.94)

Community Tools

Item is temporarily sold out.

Worldwide Free Shipping

- Takes both CR123A and 18650 batteries (accepted voltage: 3.6V ~ 9.0V)

- Cree P4 emitter

- Orange-peel aluminum reflector cup for even and smooth beam

- 900mAh regulator board installed beneath the emitter (3.6V ~ 9V input)

To enable volume discounts on this site, use coupon code: BULKRATE during checkout. You will see a discount applied at the bottom of the shopping cart. Competitive pricing is available. Contact us for details.

Quantity	3+ units	5+ units	10+ units
Rate	$11.94 shipped	$11.84 shipped	$11.74 shipped

What is Bulk Rate? BulkRate is a semi-wholesale system with items priced separately from retail. When you use bulk rates, a flat $1.70 registered air mail fee will automatically be added to your cart to ensure delivery of package. While BulkRate's intention is to offer cheaper prices when you buy in bulk, because it is priced separately it on occassions show a higher than retail price. That's why we ask you to enter BULKRATE as a coupon code to manually activate the rates. You can always opt not to use the bulk rates. If you are looking for wholesale prices please feel free to contact us.

Looking to get even more?
Try

Or Contact Us Directly

Visitors' Ratings

(28 votes, submit rating)

Reviews

Write a Review, Post Photos, or Post Videos, and get DX points!

Showing latest 4 entries. Click here to read all 18 reviews.

Displaying reviews posted by certified DX gadget owners first, followed by all other posted reviews.
Good drop in, but not for G2Z

Posted by Monoboy on 1/5/2008
Involvement: General (knows how to use it) - Ownership: 1 day to 1 week

Price:
Ease of Use:
Build Quality:
Usefulness:
Overall Rating:

Pros: Decent price. Works, but not "right" for my application. Read below. 
Cons: Purchased after reading it would fit a SF G2, thought it would fit my SF G2Z. "Not". The base is too wide to allow the bulb to fully seat in the body. Even with the outer spring removed, or reversed as recommended here. This leaves a gap between the head and the body. 
Other Thoughts: Would have been great if it fully worked. Next order might try another module set like SKU:1343 and see if that works in my SF G2Z. 
Bottomline: If you have one of the SF models that others have verified to work, this would be a good deal. For my case, it didn't fully work out. For the price, I'm not upset about it. 
					

Great fit for G2

Posted by Lightinsky on 11/15/2007
Involvement: General (knows how to use it) - Ownership: 1 day to 1 week

Price:
Ease of Use:
Build Quality:
Usefulness:
Overall Rating:

Pros: Dropped right in my G2 when outer spring was removed. No gap and is brighter than the p60 65 lumen bulb it replaced and brighter than the G2L 80 lumen led. 
Cons: Inner spring is a bit too long but there still is no gap between head and body. 
Other Thoughts: Excellent value for the money and outlasts P60 replacement bulbs and costs less in price and effeciency. 
Bottomline: I'd get this 1447 drop in again. I have had no problems with mine as some others have noted. The color is pure white with a small tinge of yellow blue. 
					

Great until it breaks

Posted by vertigo_2_20 on 11/6/2007
Involvement: Expert (understands the inner workings) - Ownership: more than 1 month

Price:
Ease of Use:
Build Quality:
Usefulness:
Overall Rating:

Pros: Very clean and bright light, beam projects like a spotlight, batteries last forever. 
Cons: Required removal of the outer spring, shortening of the inner spring, and grinding down of the metal on the outside circumference of the part that contacts the battery in order to fit. Then the first time I dropped it (from a mere distance of about 1.5 feet) it broke. When I opened it up to look at it, the hot glue (another example of low quality) was gooey from the heat the bulb produced, which may or may not have been part of the reason for the failure. 
Other Thoughts: I'm just glad it didn't break when I needed it, just when I had my car door ripped apart in the middle of the night hooking up a speaker (still a lousy time for it to happen, especially since my backup flashlight was a pathetically weak single LED radioshack light). 
Bottomline: I would not recommend this to anyone that's not willing to spend a fair amount of time installing it or that would use it in any situation that you cannot afford to have it fail. I would be hesitant to recommend to anyone else, just due to the annoyance factor of having your light break so easily, leaving you in the dark. 
					

Great fit for a G2

Posted by callmeshyguy on 8/23/2007
Involvement: Expert (understands the inner workings) - Ownership: more than 1 month

Price:
Ease of Use:
Build Quality:
Usefulness:
Overall Rating:

Pros: Good looking Cree and reflector. Good tight beam and good spill. Brighter than the stock bulb  
Cons: Had to rewire to direct drive because circuit board was not working well. Removed spring and cut it short for good contact.  

Bottomline: Good value for a Cree and reflector set. Versatile 3.6 to 9v from rechargeable to primaries.  
					

Specifications

- Weight: 0.50oz

- Assembly Length: 1.25"

- Diameter:

1.062"/2.7cm Widest (topmost edge of the relector)

0.728"/1.85cm Narrowest (base of the circuit board)

- Battery contact spring (positive node) length: 0.394", diameter: 0.276"/0.7cm

Parts included (as shown in pictures):

- 1x Cree Emitter with Regulated Driver (circuit) Module

- 1x Aluminum Reflector Cap (non-removable)