community tools » Post a review and get DX points » Post a video and get 3-10 DX points » Product alerts (availability, price drops, promos, etc) » Report a lower price » Post/edit information on this page » Discuss this product (forum) » Add to your DX wish list
Pros: Does not go rock hard.Very easy to work with.Tube is full and has no runny residue like others I have purchased.Just as good as ones priced 5 time this amount.Easily able to store unused glue.Enough to share with everyone you know...lol
Cons: How could you complain for this price?If you do then go to the store and buy some.Shipping on the other hand took more than 3 weeks for this item for some reason?
Other Thoughts:
Bottomline: If this is the type of product you need to use, then you need not hesitate to buy this one.I own several different kinds of this type, and this performs just as good
Pros: -A qualidade da cola parece ser muito boa-Vem com um redutor para aplicar menores quantidades-Secagem relativamente rápida-Não deixa odores no ar
Cons: -Sem instruções-Bisnaga de alumínio pode ser furada acidentalmente quando usado o bico afinador, já que o silicone é bem denso e é necessãrio fazer força.
Other Thoughts: Após a secagem ela pode ser removida facilmente, talvez não deva ser utilizada como única forma de fixar componentes que sofram vibração.A "bisnaga" é meio pesada, o produto é bem denso.
Bottomline: Muito bom, fiquei satisfeito, mas achei um pouco caro, mesmo não nunca tendo encontrado nenhum produto semelhante em lojas.
Pros: Works well at drawing heat away.Drys at a good speed.IS not runny so it stays where you place it until it dries.When dry it can be removed as it remains in a rubbery state, does not go rock hard so good in areas that will get vibration as it has some flex in it when dry.Sticks well to aluminium and metal.Can be picked off once dry if you spill it in an area it should not have gone.
Cons: Not for all jobs as you may want the glue to go rock hard and be hard to remove.
Other Thoughts: Would be a good glue to hold down large caps to a pcb to prevent stress on the pcb tracks. If the part needed to be removed it would be possible to chip it off.
Bottomline: Great glue to will cover most applications where heat is concerned.
Pros: Tested on two items up to now and they both stuck better than the aluminium epoxy I have been using. Heat sinks became warm quickly, so its conducting heat as it should.
Cons: No instructions, cure time, etc.
Other Thoughts: When I glued the items I just left them for a while, so don't know the exact cure time, but its probably around a couple of hours.Although I probably don't need so much for my LEDs, because it sticks better than expected I will use it on other items.Take care when removing the top for the first time, mine was crushed in post, so went everywhere when I took the top of.When using on heat sinks apply plenty of pressure to give as thin a lair of glue as possible for best thermal conduction.
Bottomline: It works, it works well, its cheaper than other alternatives I considered.
Join our Affiliate Program - click here. © 2007~2009 DealExtreme.com. All rights reserved. R56496701
Note: Stock and Availability shown on this site is for your reference only. While we strive to provide the most accurate and timely stock and availability information, availability information may become out of date and may change between the time you added an item to cart and the time your order is received.