Displaying reviews posted
by certified DX gadget owners first, followed by all other posted reviews.
Quite a bright one!
Posted by
lasikaari
on 3/20/2010
Involvement:
General (knows how to use it)
- Ownership:
more than 1 month
|
Price:
|
   
|
|
Ease of Use:
|
   
|
|
Build Quality:
|
 
|
|
Usefulness:
|
   
|
|
Overall Rating:
|
   
|
Pros: Overpowers most this sized lights easily. Superior price/quality ratio. 2 mode clicky switch is useful. Easy to disassemble.
Cons: It's had it's own share of problems. Flickering, battery compartment is a bit too small for 2xCR123As, and just recently it stopped working alltogether.
The actual circuitboard broke very easily.
LED wasn't properly connected to the heatsink, and i belive it overheated and therefore broke.
Other Thoughts: I don't mind the light breaking, and I already order some spare parts for it. Those are quite cheap too!
Bottomline: It's small, powerful, and sturdy. I belive mine was simply a bad unit.
Lanterna Ultra Fire C2 Cree q5
Posted by
Alphaservertech
on 4/15/2009
Involvement:
Expert (understands the inner workings)
- Ownership:
1 day to 1 week
|
Price:
|
   
|
|
Ease of Use:
|
   
|
|
Build Quality:
|
   
|
|
Usefulness:
|
   
|
|
Overall Rating:
|
   
|
Pros: Otima lanterna, leve e compacta com grande luminosidade, facil de usar e carregar, trabalha com 2 baterias cr123a de 3 e 3,6v.
Só o botao de liga e desliga que percebi que é diferente das outras lanternas, voce aperta para ligar, aperta como fosse desligar e ela muda de modo, depois aperta uma terceira vez e ela desliga, as outras lanternas para mudar o modo voce apenas dá um toque no interruptor que ela ja muda e aperta uma segunda vez para desligar.
Cons: so nao gostei dos modos de luminosidade, ela descreve que tem 2 modos, porem nao percebi muita diferença entre os modos, tenho outras lanternas e os modos Hi e Low são bem diferentes desta, porem nao deixa a desejar
Other Thoughts:
Bottomline: aconselho para quem quer uma lanterna barata, robusta e boa, tambem com otima luminosidade.
High Output - Good Value
Posted by
themoth
on 11/18/2008
Involvement:
Expert (understands the inner workings)
- Ownership:
1 day to 1 week
|
Price:
|
  
|
|
Ease of Use:
|
   
|
|
Build Quality:
|
 
|
|
Usefulness:
|
  
|
|
Overall Rating:
|
  
|
Pros: Very useful output for outdoor use. Good for illuminating areas of a 50ft x 100ft yard. Illuminates trees approx. 200ft away clear enough to see what lurks in the branches at night. SLightly larger spill area than some others, due to a less-deep parabolic reflector. Seems just slightly bluer than my other Q5 lights. Good overall size, not too big to put in a pocket.
Cons: I bought 3 of these, and one was a little tweaky as the clicky switch has to be not-too-tight to operate. If I tighten it too much, the light will not work. 2 out of 3 work fine. consistant construction among all three. Similar, consistant beam quality/pattern as well.
Other Thoughts: For the price, it's a good deal. The beam pattern works well for outdoor use. I believe most lithium-battery Q5 lights are a tad too bright for most indoor use in a house. It's just overkill. My preference is for a medium to long throw with good spill, which is tricky since throw requires more parabolic reflector surface area (and usually deeper) to concentrate the light, which sets the light source deeper within the reflector, which in turn means less spill. To put it simply, the focal point of the reflector has more mirror surface wrapped around it. An example of this is the Tiablo A9. The texturing, or level of "orange-peel" of the reflector mainly just softens the edges of the reflected/focused light source. I don't see the point of calling it a "pro" or "con" if it is for wide area or for throwing a beam as it's just a matter of design for a particular purpose. A Porsche 911 is bad for hauling trash to the dump, as is a dump truck for racing...each has it purpose.
Bottomline: Bottom line.....highly recommended light for general use, biased slightly for illuminating up to 100ft. And you can always unscrew the lens/reflector and use it as a candle.
Not quite as good as I was expecting, but good.
Posted by
gearbox
on 7/4/2008
Involvement:
General (knows how to use it)
- Ownership:
1 day to 1 week
|
Price:
|
  
|
|
Ease of Use:
|
  
|
|
Build Quality:
|
  
|
|
Usefulness:
|
  
|
|
Overall Rating:
|
  
|
Pros: Pretty bright, useable low and high modes.
Nice beam profile due to stippled reflector.
Seems fairly rugged, fairly well heat-sinked.
Machining seems well-spec'ed.
Cons: The switch must be positively pressed. No simple tap to turn it on, this thing almost has to be held in both hands. It's harder to turn on than that girl you used to date in high school that just wanted to make out and talk but then later screwed the guy that used to pick on you for your lisp.
The switch kind of has to be pushed a little off-kilter, rather than straight in.
Other Thoughts: Oddly, the modes are regulated by the tailcap switch. One full click to turn it from off to high, then another FULL click to switch to low and another full click to turn off. Semi-presses don't do a thing except for momentarily extinguish light.
The body is a bit short: even my medium-sized hand overlaps the heatsink fins and tailcap. This doesn't really affect anything.
Bottomline: A bit about the light emitted: It is colored more warmly than my SF G2 with sku 1447 or my SF D3 with R2-bin sku 11836, BUT the main beam is narrow and more dim than either. The sidespill is wider but dimmer. I find it odd that a Q5 can't beat a common-bin Cree P60.
I guess the regulator must be at a low amperage. Hopefully that means long run time, but that depends a lot on the efficiency of the convertor.
Finally, this light will be relegated to my "fire bag," the bag that holds stuff that I need in case the house catches on fire from all the lights.
I do really like how warm the color is.